LM7905 7905 IC -5V Voltage Regulator ICThe LM7905 series of three terminal negative regulators is available in TO IC. with a variety of preset output voltages, making them suitable for a broad range of Applications. Internal current limiting, thermal shutdown, and safe operating area protection are used by each kind, making it almost indestructible. Features LM7905 is a Negative voltage regulator that outputs 5 volts The LM7905 is a three pin IC Output Current up to 1. 5A Thermal Overload

This N20-3V-35 RPM Metal Gear Micro Motor is a DC motor with a small capacity

Input Voltage Range

01µF/ 10nF  Rated Voltage 630V Tolerance ±5% Mounting Type Through Hole Type Polyester Film

act as a flash breaker tape during component removal from the mould

These are Carbon Film Resistor with a value of 150k ohm 1/8W and tolerance of ±5%

5k ohm 1/4W and tolerance of ±1%

The individual module has a total of 8x8 LEDs

Model GBPC3510W Type Bridge Rectifier Diode Working Peak Reverse Voltage 1000 V  RMS Reverse Voltage VR(RMS)   700 V   Average Forward Rectified Output Current 35A Peak Reverse Current at 25°C 10µA No

The circuit is capable of driving a 3

0 V Package DIPˆ‚¬„¢14 Input Current 1 uA Powering Current 80 uA Output Current at VCC 6 mA Fan-Out 10 LS-TTL Load Propagation Delay 20 ns Temperature Range -65 °C to +150 °C

8mm Length 70mm

Interface definition directly marked on the shell