GRACO GL-32™ Grease Injector, Carbon Steel, 1-Injector Manifold, 1/8 in. BSPP x 6 mm - (SKU: 24F509)The GRACO 24F509 GL 32 is a single injector manifold grease injector made from carbon steel. It is designed for reliable, adjustable lubrication delivery in automated lubrication systems, primarily for on road vehicles and off road equipment. Key Features: Grease Injector GL 32 Carbon Steel Adjustable output volume from 0. 0010. 008 in (0. 020. 13 cm) Minimum: 5. 3 MPa (750 psi); Maximum: 24. 1 MPa (3500 psi) Compatible with up to NLGI #2 grease;

Regularly inspect and replace filters and seals as needed

Replace as part of scheduled maintenance or when signs of degradation are observed

Rotate the agitator so that the air motor is to the left of the shaft for proper alignment

intended to reliably transmit power and signals between the motor and wheel components of the sprayer system

particularly with GRACO tote buckets in 2-pump setups

Replace cutters and spacers as needed to maintain performance

Used in fluid manifolds for GRACO Reactor equipment to facilitate manual control of valves or other mechanisms

The GRACO 24G630 is an adjustable beam

but it is intended to prevent leaks and ensure proper airflow within the system

Used in high-pressure spraying applications such as painting

Regularly check and refill the grease reservoir to avoid low-level faults

It is engineered for reliability and is intended to be used as a replacement or maintenance component within GRACO pressure washer equipment