Rubber. Identification. Infrared spectrometric methods1 Scope This International Standard specifies two methods for the identification of rubbers, including thermoplastic elastomers, either in the raw state or in the form of vulcanized or unvulcanized mixes. The first method is based on infrared spectrometric examination using the transmission technique. The second method makes use of analysis by reflectance. A comparison of the spectra resulting from reflectance (attenuated total reflectance ATR) and

made in carbon and alloy steels

with or without steel wires

CDC double point status (DPS)

BS EN 60674-3-7 is a British Standard for fluoroethylene-propylene (FEP) films

03 eV or less

Examination and testing at manufacture

The specification of a physical interface is the subject of a separate part to be developed in the IEC 61291-6 series

BS 1940 provides you with a distillation range and the residue on evaporation of butanone

It gives recommendations for defining library template objects

Vent sizing to protect an enclosure against the internal pressure effects of a dust explosion

BS EN 12150-2 covers the evaluation of conformity and the factory production control of flat thermally toughened soda lime silicate safety glass for use in buildings

in order to achieve environmental objectives and to maintain continual improvement in the environmental performance of their products as well as their processes