Lug Terminal Hammer Crimp ToolLug Terminal Hammer Crimp Tool This simple, inexpensive crimping tool can be used to crimp connectors, lugs, terminals, splicers, on #8 (3. 264 mm, 8. 37 mm2) through #4 0 AWG (11. 684 mm, 107 mm2) wire. Spring loaded pin locks in up position for loading connector and cable. When released, the pin holds the connector securely during crimping. Use with a hammer or vice. Though not quite as easy as the professional production crimpers for large lugs,

(3212 watts of solar input power)

You can use the Battery Guard with the battery disconnect function and auxillary side post function simultaneously

High amp rating: 440 amps (10

giving you peace-of-mind in knowing that the longevity of this inverter charger will last for years to come

Pytes E-Box 48100R Quick Start Guide

5000 Watt 12VDC to 240VAC 60Hz Well Pump Power Inverter

(NOTE: See HyperVOC at bottom) 200V + HyperVOC (battery voltage up to 48V)

GFCI outlet

As with the whole Classic Line

2 Weight [lbs] 116 Life Cycles 8000 @ 80% DoD Round Trip Efficiency >98%

(no dip switches

including bottom mounting and tilt-up options