35 3-NO30 - RENOLD 3/8 Inch Pitch Premier Standard LinkDouble cranked links are available for most sizes and types of chain. The unit consists of an inner link (No. 4), with cranked links retained permanently in position by a riveted bearing pin. Screw operated extractors break chain by forcing the Renold end softened bearing pins out of the outer link plates. For other brands of chain, the rivet swell must first be ground away.

13 02 j Narrow Bore Size - 15mm Pressed Steel Cage Normal Radial Internal Clearance

This 4206 B TVH FAG bearing is a Open Type Deep Groove Radial Ball Bearing with a modified internal design and a glass fibre reinforced polyamide cage

This 306 2Z SKF bearing is a Shielded Deep Groove Radial Ball Bearing with a standard radial internal clearance The bearing's dimensions are 30x72x19

with Locating Ring Medium 35mm - Bore Size Extra Capacity Design Steel Cage Normal Internal Clearance

This 120063X/120110 bearing is a gamet single row plain cup taper roller bearings

N 2 17 E M1 Two Flanges On Inner Ring and No Flanges On Outer Ring Light Series 85mm - Bore Size Increased Capacity Design Solid Brass Cage

719 02 CD G A /P4A Series - SKF - Extremely Light Bore Size - 15mm 15 Degree Contact Angle Single Universal Light Preload Precision Rating

The bearing's dimensions are 45x75x15mm

This NJ2307-E-M1 bearing is a single row cylindrical roller bearing

This 61948MA bearing is a Open Type Thin Section Radial Ball Bearing with a Machined Brass cage

This 53314 bearing is a Single direction thrust bearing with a spherical housing locating washer

62 05 TBR16 P4 Single Row 62 Series Bore Size - 05 - 25mm Inner Ring Guided Phenolic Resin Cage Precision Rating