360mm Flat Round Vacuum Cup With Vulcanised SupportThese cups are recommended for handling very heavy loads both vertically and horizontally. They are vulcanised onto a steel support and have a labyrinth graved face made in the same compound as the cup. The support is provided with four steel pins with as many self locking nuts for guiding the cups and fastening them to the automation, as well as with a threaded sleeve for vacuum connection. Moreover, these cups are provided with four springs to

It is suitable for generators with capacities not exceeding 15 mc/h and designed especially for series MSVE

for space reasons

The vacuum with disposable oil lubrication is adjusted via two oilers located in correspondence of the support bearings

The containers of the FK series are suited for quick coupling filtering cartridges and are composed of a transparent PET (Polyethylene terephthalate) container and a head with a brass ring nut coupled together with an interposed seal

They are composed of an anodised aluminium mono-block structure

the servo-controlled slide valve for the compressed air supply and are contained the vacuum chambers as well as the various connections

Both items can be supplied with or without automation fastening support

close to the utilities (vacuum cups

with no risk of deformation or rupture

raw cement manufactures

These pumps are necessary when the air to be sucked contains water condensation

transformers