Ships and marine technology. Marine wind vane and anemometers1 Scope This International Standard specifies the type, structure, function, performance and testing method of marine wind vane and anemometers (hereafter referred to as wind vane anemometer) to be installed on a ship for measurement and indication of wind direction and velocity at sea for the purpose of navigation, as recommended by Regulation 5 of Chapter V of the International Convention for the Safety of Life at Sea (SOLAS), 1974, as amended. It

It requires designers to show that anchors will perform satisfactorily in service conditions and will also prevent failure in the supported structure (ultimate limit states) in more onerous conditions than those checked historically

and 16 mm motion-picture release prints

mechanics and heat

it includes the QoS requirements of information storage and processing IT systems

The corrosion resistance of the product is proportional to the coating thickness

BS 4857-2 on acoustic testing and rating of terminal reheat units is relevant to:

41 is not suitable for wastewaters and industrial effluents

transient disturbance control and dynamic disturbance control requirements for microgrids

What is BS EN 60990-Methods of measurement of touch current and protective conductor current about

Inorganic thermal insulating materials manufacturers

The designation by symbols and numbers occupies a maximum of six positions:

for example up to E85