JET Non-Ferrous Circular Saw Blade 350mm x 32mm x 2.5mm x 180T for J-CK350-2/4KDetails FEATURES: M2 HSS Bright finish 54 56 HRc for use on non ferrous machines at high RPM 2 pin holes are 11mm diameter 63mm on center 2 pin holes are 8mm diameter 45mm on center The first number is the outside diameter of the blade, 350mm The third number is the center hole diameter, 32mm The fourth number is the total number of teeth on the blade, 180 teeth Replacement Blade for JET J CK350 350mm x 2. 5mm x 32mm x 180T Non Ferrous

Precision machined on the base

Jet 714000 Specifications

RME-38 Spring

Perforated steel work table

4MM Fluid Control Adjustable Trigger Style Two Finger Trigger Fluid Tube STD Fluid Hose NO Air Hose 20m Standard Operating Voltage 65 kV Max Current 120 mA Min Inlet Pressure 2

GC-4003-3MGH

For Use With Project Painter Plus

Cable throttle 8-Gallon Two Stage Gasoline

2 Air & Fluid Connection  G1/4 (AIR)(NPS1/4) - M16 x 1

Each drawer uses full-extension ball bearing slides that let you load 100-200* lbs per drawer (*drawers with double slides

Control of the MVR is achieved through an air pressure control signal generated from the transducer panel

8 L/min Air volume / cycle @ 90psi 9