Electric cables. Metal foil and longitudinally welded aluminium sheath constructions of power cables having XLPE insulation for rated voltages from 66 kV (U_m = 72.5 kV) to 132 kV (U_m = 145 kV)1 Scope This British Standard specifies requirements for construction and performance, and gives methods of test, for metal wire and foil sheath, or metal wire and longitudinally welded aluminium, or longitudinally welded aluminium constructions of power cables having XLPE insulation for rated voltages from 66 kV (Um = 72. 5 kV) to 132 kV (Um = 145 kV). The tests and requirements in this British Standard are additional to the tests and requirements

It is applicable to products having an iron content of not lower than 2 mg/kg

Coldwater source

This International Standard defines the principal terms relating to the quantification of the mass of water and extractable matter contained in a textile material

category B1

Why should you use BS EN 13312-3 - Performance criteria for sampling and inoculation devices

and structures for the specification of the description of a learning resource

or identify at what points interoperability is best achieved

— narrow sheet metal profile

solvent spotting and steam pressing

000 ppm (parts per million)] [1 × 10–6

This part specifies procedures for assessing the generic weldability for resistance welding of uncoated and coated metals

2 up to and including ST8