Alpha HSS Tap UNC Bottoming 5/16x18 UNCHB5165 16x18 BOTTOMING taps have a lead of two threads and are used when tapping blind holes. Usually preceded by a taper or intermediate tap. Alpha bottoming taps can be identified by their plain shaft, they have no rings on the shaft near the driving square. Diameter: 5 16mm Pitch: 18mm Overall length: 53mm Shaft Diameter: 6mm Drive Square: 4. 9mm Tapping Drill Size: 6. 60mm Weight (gr) 25. 00

Mounts recessed into the bottom of the gate for a low gate profile

T-Bolt Clamp-Super 98mm x 103mm

1 x HD030 torch head

1000kg WLL - Color Violet –Length  1

Crimp 7-8 Ignition Terminals

Continuous flame lock button

Five minute epoxy in dual syringe

5/16in Included Angle Carbide Burr

industrial strength & non-ozone depleting

Hot blower & Solder head

1 x Pkt of 100 Yellow Colored Cable Ties - 200mm x 4

Vee Belt Pix 2113mm Pitch / 2133mm Outside -Item Number A82