Ubiquiti Unifi Pro Max 16 Rack Mount3D Printed rack mounting arms so that you can mount your Unifi Pro Max 16 Switch (Models: USW Pro Max 16 & USW Pro Max 16 PoE) into a standard 19 inch Rack. Available in both a CENTER and SIDE JUSTIFIED option depending on how you'd like the mount the switch. The SIDE JUSTIFIED option works as either Left or Right Justified. Includes both arms and screws for fixing them to your Switch. Does not include Rack Screws, Cage Nuts, or Ubiquiti network

3D Printed 1RU rack mount for the Home Assistant Yellow and DFRobot IoT Router Carrier Board

(Not required if ordering the "2x Mounts" option2) Remove the rubber feet from the Mini PC

This listing is just for the Mount

The Sled can be secured with a screw if desired

The mount comes pre-assembled and you just need to remove the two back plates and then slot your devices in from the rear

3D Printed 19 Inch 1U Rack mount for Cisco Meraki Z Series Gateways (Models: Z3/Z3C/Z4)

with all ports being accessible

The frame comes in 3 parts and the sides are connected to the main body with 10 Screws (Included)

Tech Specs:

3D Printed rack mount that lets you mount your Unifi Flex XG Switch into a Single RU

3D Printed Wall mount that lets you mount your Ubiquiti Unifi Switch Lite 16 PoE out of the way like onto a wall

screws for the Raspberry Pi are not included