Clear-Com PSU-101 Rack Power Supply Module for IMF3 IntercomPSU 101 Power Supply for the IMF 3. (Does not power the Party Lines attached to CCI 22 modules. These require Encore Master Station PSUs such as the PK 7, PS 702 or MS 702). The PSU 101 is the power supply for the IMF 3 interface frame. It has both an audible failure alarm and failure relay contacts to activate a remote signal. A single PSU 101 will power a minimum of two interface frames, depending on the type of interfaces and their individual power

5" LCD screen and select

These include (but are not limited to) the DS35

Resulting from many years research into professional dynamics applications

The bar features a black powder-coat finish

Two controllers may be linked in larger systems

UL 1480 and 2043 approval pending

designed to deliver multi-channel

extremely wide dynamic range stereo microphone preamplifier intended for demanding audio recording

Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1000 ft

each channel is equipped with a 3-position PFL switch that selects between source-A

402 Series IV and RMU108 loudspeakers

1 mic input