99284 - SKF Speedi-Sleeve - Max. Shaft Diameter 72.01mmWhen wear and damage occur on a shaft, SKF Speedi Sleeves are the solution. In order to perform their function properly, shaft seals must be seated on a smooth, round shaft face. If the shaft face becomes worn the seal can no longer perform as necessary, and, over time, will allow contaminants to enter the component and cause further damage to both the shaft and the component. Simply replacing the seal will not repair the damage to the shaft and

This NU2310-E-M1A-C3 bearing is a single row cylindrical roller bearing

33 09 A 2Z C3 MT33 Maximum Capacity

NU-type bearings have two flanges on the outer ring and no flanges on the inner ring

70 17 CD P4A TBT A Extra Light Series 85mm - Bore Size 15° Contact Angle

S 62 02 2RSR Stainless Steel Light Series 15mm - Bore Size Rubber Seals on Both Sides of Bearing Normal Radial Internal Clearance

This NP2 11/16 bearing is a Cast Iron Pillow Block Unit

The SKF 29317 EN1 Spherical Roller Thrust Bearing has been specifically engineered by SKF to house a large number of rollers in order to optimise load distribution and support heavy radial loads and axial loads in one direction

This C2220K bearing is a Open Type CARB Toroidal Roller Bearing with a 1:12 tapered bore and a standard radial internal clearance

62 13 rs1 c3 Metric

CR 30 V UU Inch Series Size High Carbon Steel Full Complement Type Model Code Sealed Type Cylindrical Outer Ring

while offering excellent oil and chemical resistance

230 52 E1 C2 Light 260mm - Bore Size High Capacity Internal Design Cylindrical Bore Stamped Steel Cage Radial Clearance Smaller Than Normal -