Stronghand Welders Angle Clamp, 2-Axis, Std. ScrewSHWAC22 Stronghand Welders Angle Clamp 2 Axis Std. Screw 2 Axis Fixture Vises Made with machined cast iron. Featuring these improvements: Machined outside faces usable for upright joint Stand off increases access Quick acting screw on deluxe models. 2x Standoffs Machined on Outside Faces Slot Size (A): 35. 5 mm Slot Width (B): 11 mm Miter Joints (C): 63. 5 mm Jaw Length (D): 80 mm T Clearance (E): 47 mm Jaw Height (F): 33 mm Weight: 2. 75 kg

Brand: HOLEMAKERPart Number: AS3325Hole Diameter: 33mmDepth of Cut (DOC): 25mmPilot Pin Diameter: 6

CA47 | Champion 37pc Brass Hex Nipple Fittings Assortment

25 Hex Flange Nut -20pk

Sharpens knives scissors garden tools pruners shears andmore

Code DescriptionWD9812W4 Kale WD9 8-12mm W4 (10pc)WD9816W4 Kale WD9 8-16mm W4 (10pc)WD91220W4 Kale WD9 12-20mm W4 (10pc)WD91222W4 Kale WD9 12-22mm W4 (10pc)WD121627W4 Kale WD12 16-27mm W4 (10pc)WD122032W4 Kale WD12 20-32mm W4 (10pc)WD122335W4 Kale WD12 23-35mm W4 (10pc)WD122540W4 Kale WD12 25-40mm W4 (10pc)WD123045W4 Kale WD12 30-45mm W4 (10pc)WD123250W4 Kale WD12 32-50mm W4 (10pc)WD124060W4 Kale WD12 40-60mm W4 (10pc)WD125070W4 Kale WD12 50-70mm W4 (10pc)WD126080W4 Kale WD12 60-80mm W4 (Ea)WD127090W4 Kale WD12 70-90mm W4 (Ea)WD1280100W4 Kale WD12 80-100mm W4 (Ea)WD1290110W4 Kale WD12 90-110mm W4 (Ea)

C105-11 | Champion 3Ag 20 Amp Glass Fuse -10pk

• Thread: 3/16 UNF• Insert Height: 6mm• Quantity: 10

Features:• Designed for applications that require extra resilienceunder extreme pressure• “T” section (1” x 1-7/8”) is made from cold drawn steelwhich offers great resistance to bending in use• Malleable iron head and slide allow these clamps to beused in heavy duty applications• Main screw has rolled ACME threads for smooth movementand increased resistance to wear• The sliding head is fastened to the T Bar by inserting asteel pin through any of the locating holes on the bar• The steel bar head and slide have an attractive powdercoated finish the main screw handle and pins are blackenedfor increased resistance to corrosion

920520N | Teng 1/2in Dr

• Hardness at the striking end is maintained to under 42HRC so that the head will not splinter when subject tohammer blows

A handy built in cutter cuts wire up to 2mmdiameter

Set contains:125 x 6mm125 x 8mm140 x 10mm150 x 13mm163 x 16mm175 x 19mm