j1939 Type 1 'Y' Splitter CableContact for volume pricing or to place special orders Cable provides three 9 pin j1939 Type 1 connectors that allow a device to be connected to the vehicle, and have the correct connector (either the threaded or square connector) to be installed in place of the vehicle connector. Each part of the cable is 1 ft. in length to give a total length of 2ft. All 9 pins are connected between the j1939 Type 1 connectors as a direct pass through to each

and will provide enough charging current for larger tablets

Total length of 30 inches with wiring as follows:

14-pin RP1226 connector (PACCAR) to 16-pin dual row connector for CalAmp LMU3640/Veosphere devices

Contact for volume pricing or to place special orders

1-Wire Temperature Sensor (DS18B20)

Cable is 2 meters in length with 9 connections populated

9-pin J1939 Threaded Type I passthru length of 0

Cable converts a 9-pin j1939 type II connector to OBDII

The ID can be cleared out to start over by hitting the 'ESC' key

Equivalent cable for 5C356-2

Cable is 0

Flying leads for Power (fused)