T-Slot Table 2000x2000x200 Plasma nitrided with transverse slots Leg standard equipment 650T Slot Table, with vertical horizontal hole arrangement on the table top and a parallel hole pattern in a 100 mm grid on the sides, as well as M10 threaded boreholes and cross slots. Due to the cross slots spaced 100 mm apart, components with an elongated hole can be vertically mounted in any position. For this purpose threaded clamp bushings and t nuts are required. We recommend using the T Slot Table for "clean" or spatter free welding tasks, since

Clamping Block

due to its rounded clamping surfaces

Stop- and Clamping Square 275 WL (Item No

The Clamping Cone is fastened with bolts

the Supports can be adjusted easily and precisely

cycle times

Universal Stop individually adjustable through the elongated hole within a range of 0-50 mm

Product number: 160205

Both fixed and variable stops are possible

The fourth ball located in the center reduces internal friction and increases the force of the handwheel

with both-sided boreholes

For free positioning of the prism independent of the hole grid you can easily unscrew the collar from the prism