Lavender Blue Water Soluble Aniline Wood Dye Powder - 1oz, 28gTo dissolve we recommend using hot, but not boiling, water. Always start by putting the water into a suitable glass, plastic (HDPE) or ceramic container, and then gradually add the powder. Stir the solution while adding, and then stir occasionally over the course of 10 15 minutes to ensure all powder is dissolved. Allow to cool before use. The mixed stain can be applied to wood with a sponge, cloth or brush. These 28g (1oz) packets will create: 2

3-ply sheet suitable for bevelling

The mixed stain can be applied to wood with a sponge

Cuts very well in hollow areas

100ml RF3 Fine grade liquid abrasive is for use after the surface has been wet sanded to 2000 grit

The comfortable curved ergonomic handle allows for long periods of carving without hand fatigue

and so instead of a clean slice it has deformed some of the pattern

and then stir occasionally over the course of 30-60 minutes to ensure all powder is dissolved

For about 1/3 - 2/3 of each strip this is the case

RG300 #3 x 3/4"

plastic (HDPE) or ceramic container

70° x 1/4” (6mm)

SUITABLE for use over dartfords® Tinted and Pigmented Nitrocellulose Lacquers