19189 SL-1 Type SL Premium Carbide Burr- Taper Shape Radius - 14º Included AngleDouble Cut The most popular burr for ferrous applications. The flutes are ground in both the left and right hand directions, offering better operator control and rapid stock removal in harder materials. The double cut geometry reduces the size of the chips and can be used at slower than normal speeds. Aluma Cut Designed for used on aluminum, non ferrous metals, soft steel, reinforced plastics and other soft materials. The burrs are designed with a

The 26 Series Combination Units package a filter and regulator together

88" 3 oz Brass 50-145 psi 4238-ADJ 3

473" -40°F-165°F 200 psi PFE6 3/8" 9/16" -40°F-165°F 200 psi PFE8 1/2"

This means that the brass insert is a permanent part of the strain relief

textile reinforcement

Type: Cylindrical

the SNATFB has an eccentric locking bearing insert

Fits gearbox sizes SK1SI75

Note: For high-vibration applications

Little and light

the basic design of this unit has remain unchanged for many years

Action & Motion Air Pilot