Hi-Flame Alpha 3 Baffle PlateThe baffle plate in the Hi Flame Alpha 3 stove is a heavy cast iron throat plate that sits above the firebox, directing combustion gases across the chamber to maximise heat extraction before they exit via the flue. The Alpha 3's larger output means its baffle plate is heavier and experiences more thermal stress than smaller models, making periodic replacement important. This part is made to the original Alpha 3 specification. Compatible with: Hi Flame

protecting the steel or cast iron body from direct flame contact and helping the stove retain heat between burns

Material: Vermiculite

which is essential for consistent combustion

The baffle plate for the Mulberry Joyce stove sits above the firebox and deflects hot gases back down toward the fuel bed before they exit up the flue

Part type: Baffle plate

The door rope seal on the Hamco Glendine forms the airtight gasket between the door and the stove body

This is a full set of 9 cast iron AFS001 firebars designed to suit specific Arada / Aarrow / Stratford stoves

A cracked baffle left in place will allow heat to bypass the chamber and escape up the flue

which is essential for controlling the burn rate and keeping combustion gases inside the firebox where they belong

or breaks down

The riddling grate for the Blacksmith Anvil sits at the centre of the firebox floor

keeping logs and solid fuel from rolling forward into the door or glass during burning