Blichmann Thrumometer - 3/8″When wort is too cold, you get long lag times and increased opportunities for bacterial infection. When its too hot, off flavors can form. Blichmann Engineerings patented ThruMometer lets you get it just right letting you adjust wort and water flow rates in your counterflow heat exchanger to dial in an exact temperature, with no more guesswork! Available to fit 3 8" ID hose and 1 2" ID hose. Plus, use only the water you need good for the environment

Along with the necessary aromatics

Be extremely careful with overfilling your kegs or tipping them over when the gas has run out

Killian’s

A low pitch rate can be used to drive these aromatics even higher but the brewer should ensure this low pitch rate can be combined with a continuously high fermentation temperature

Barb (To fit 5/16" I

Easily swap out the barb to a different size if desired

It's also the perfect solution for secondary fermentation of 5 gallon batches

Wide 0-60 PSI operating range suitable for both dispensing and rapid burst carbonation

Push down to tap/pull up to untap

and plums in the past

MINIMUM RECOMMENDED IS 2°C (35°F)

Resistant to corrosion with a reinforced wire rim