3/4"-20 x 3/4"-20 Universal Joint, WoodwardHyper Racing # 16 610 Woodward Universal Joints are made to exacting standards from hardened chrome vanadium tool steel in two sizes. They feature ball bearing with grease seal design, stainless truss head screws, and two set screws at each end. We recommend removing the stock set screws and replacing with a 28 x " set screw with a jam nut, this will allow the set screw to have a locking nut to eliminate the possibility of the universal coming loose.

-Length: S

Too much compression will cause the tire to lose compliance with the surface making the car get unpredictably tight

DAYLube™ High Performance Grease is highly recommended for this product as it does not fling off and is compatible with the treatment

Lightweight CSI Bump Rubber Cup clips directly onto the eyelet of CSI RS-series small body shocks

A 7/16" rod end with a 3/8" hole is needed

Hyper Racing # 01-1314

Lightning Sprint and Midget

a reliable and durable device designed to accurately measure pressure levels within a range of 0-200 PSI

Inline fitting with 1" barbed ends and M10 x 1

Hyper Racing # 604-107

Hyper Racing # 04-604-2

does not work well while racing)