Paper and board. Testing of cores - Determination of flexural modulus by the three-point method1 Scope This part of ISO 11093 specifies a method for the determination, by the three point method, of the flexural modulus of cylindrical paper and board cores which meet the following criteria: internal diameter: 50 mm to 350 mm; minimum wall thickness: 0,05 internal diameter, but not less than 10,0 mm; minimum length of core: 10 internal diameter, but not less than 1 000 mm. If the flexural modulus has to be used for the calculation of a paper

Compression ignition engines

This International Standard specifies two empirical methods for the quantitative determination of the loss of mass from a plastic material under defined conditions of time and temperature

together with ISO 15004-1 and ISO 15004-2

requirements for statements by manufacturers

BS ISO 5834-2:2019 supersedes ISO 5834-2:2011

— collection management systems and digital repositories

9  Process requirements

environmental and safety aspects concerned with the design of chemical stores on agricultural and horticultural premises

BS 8468-4 applies to powered air-purifying respirators (PAPRs) intended to be used during

Part 4: Code of practice for operation

Low-voltage equipment standards IEC 60947 and IEC 60439 currently include short-circuit ratings for products and assemblies respectively

the “R” method has been eliminated and the “σ” method has been adopted