Triumph valve lash caps 500 650 750Lash caps can be used to correct rocker arm geometry, protect titanium or soft valves, or add height to the valve tip when a valve is too short. These lash caps are made by Kibblewhite and are heat treated to be hard on the outside, without being brittle and prone to cracking. These made in USA lash caps are sold in sets of four. For most Triumph applications, . 313" O. D. (outside diameter) are correct, for 6mm valve stem, use the 6mm set option.

1950-1958 500 T100 and TR5 close fin alloy heads use E3003 or 70-3003 head gasket

Our crankshaft/points seals are made in England and are of the highest quality

Highest quality Hepolite high gear bearing

Each set is for two pistons

only using ChroMoly tubing

it meets the more stringent JASO MA2 / MA requirements for engines that share the same oil between clutch/ engine/ primary

Maximum recommended valve lift is

Simply insert ring ends into the wedge shaped jaws

Capable of delivering up to 30volts and current up to 20 amps at speeds of up to 10

Genuine Lucas Classic L564 Complete Rear Lamp

(That's only 453 grams total

These 650/750 unit rocker box gaskets replace Triumph part # 71-2599 or E12599