ER-Collet with seal for IC ER40 | 472EH | < 15µm | Ø 14Application: Collets sealed for high pressure cooling 120 bar with IC DIN 6499 B (ISO 15488 B) ER system Note: Only nominal size d can be clamped (applicable up to 120 bar). In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet.

For sealing tools with internal cooling in collet chucks

Entirely hardened and grinded on the inside and outside

Starting position is kept when turned on

For mounting taps

- Small size

5V AA Batteries * 3 ( Do not use low self-discharge battery )

Ø 125 mm with locks

Clamping possible on both sides

integrated in the adapter

A complete certificate of calibration traceable to the N

no adhesion occurs and the tool

Automatic switch off