TP24-03 Characterization of Elliptical Pitot Tube for Water Flow MeasurementsIn 2018, CTI switched from simplex pitot tubes to an elliptical style pitot tubes for water flow measurements. This change was made to reduce the impact of change in Reynolds number on the calibration coefficient of the pitot tube. In addition, the new design incorporated a one inch (1) round body to reduce the vibration of the pitot. In this process, the blockage area of the pitot probe was increased. McHale has performed calibration studies at three

foil thickness

The program takes advantage of the synergistic protection provided to carbon steel by diol technology without requiring the use of organic inhibitors

The technology has been widely used in Europe for over 5 years with success

corrosion monitor that is capable of simulating a plant's critical heat exchangers

The phenomenon of cooling tower fill fouling was studied by examining the relationship of microorganisms

Users report a reduction up to 90% of the lubrication related electric motor bearing failures and 75% of the gearbox failures

the variation in the curves was reduced

This paper describes the features of the CTI Toolkit 4

Change Log:

Cooling tower plume formation can be a safety or aesthetic concern

strain gages

that the low bid price is the best offering a He may go further and attempt to estimate a total investment comparison between the several offerings by adding to each bid an estimate of the installed basin