99181 - SKF Speedi-Sleeve - Max. Shaft Diameter 46.1mmWhen wear and damage occur on a shaft, SKF Speedi Sleeves are the solution. In order to perform their function properly, shaft seals must be seated on a smooth, round shaft face. If the shaft face becomes worn the seal can no longer perform as necessary, and, over time, will allow contaminants to enter the component and cause further damage to both the shaft and the component. Simply replacing the seal will not repair the damage to the shaft and

This hm801346/hm801310 bearing is an imperial taper roller bearing

Shell Morlina S4 B oils are high performance synthetic bearing and circulation lubricants

This 7307-B-MP-UA bearing is a single row angular contact bearings with a modified internal construction

N 312 EC J C3 No Flanges On Outer Ring

Find more details on the 50X72X8 HMS5V below

17 14 4310 169

The UCFC212 Bearing Unit has a UC212 Bearing Insert which can be easily removed from the FC212 housing and replaced

Snap Ring Groove with Snap Ring Polyamide Cage Internal Radial Clearance Greater than Normal

They are composed by complex calcium sulphonate and synthetic PAO mineral oil

213 18 EJ W33 Extra Heavy Series 90mm Bore Size Cylindrical Bore 2-piece Steel Cage

This 21308EAKE4C3 bearing is a Spherical Roller Bearing with high capacity steel cage

60 08 DDU Extra Light Series 40mm - Bore Size Rubber Seals on Both Sides of Bearing Normal Radial Internal Clearance