Shrink chuck 4,5° HSK 100 - 05 - 85Application: For mounting tools with straight shanks. Note: Toolholders suitable for induction , contact and hot air shrink units. 3, 4, 5 with h4 tolerance and 6 32 with h6 tolerance For 3, 4 and 5 mm only solid carbide tool shanks must be used! All holders are made of forged steel Specific, low warpage hardened Surface hardened HRC 58~60 Hardening depth 0,8mm~0,9mm Taper angle tolerance < AT 3 according to DIN 2080 Surface roughness Ra < 0,4 m

For adaption from ISO40 to PSC (ISO 7388-1 to ISO 26623-1)

Setting angle: 95°

From DCONWS = 25 on two clamping screws

Collets sealed for high pressure cooling 120 bar

PSC to PSC adapter with axial clamping

Suitable for internal coolant

Carbide tipped measuring faces

Integrated pull-down mechanism

One turning toolholder - four possibilities:

Measuring surfaces are carbide

5 with h4-tolerance and Ø 6 – Ø 32 with h6-tolerance

thin thread and pitch diameter oversize