MidNite Solar MNPowerFlo 5.1kWh 48V Server Rack LiFePO4 BatteryThe new MidNite MNPowerflo5 Lithium Iron Phosphate server rack battery is designed to work with the MNROSIE and MN15 12K AIO closed loop. The Battery uses the Pylontech protocol so it will close loop with any inverter that speaks Pylontech. We use Grad A+ cells from Eve. The MNPowerflo is truly plug and play. No dip switches to set. No programming to do, just plug in the communications cable and you are done. This is taking things to another level.

35" (136 mm) wide

On board relay isolates electronics from back voltage spikes from large 440 amp relay

for brief durations only

: 63 amps)

We've added even more strength and stability by using the new arms which bolt to the top and bottom of our mounting bracket using eight 1/4 x 1 inch bolts and nylock nuts

MPPT Charge Controller Features:

BMS Monitors & Balances Individual Cells

High voltage alarm: 64

These are no longer included as they have been replaced with lock nuts

An optional wired remote can be added for quick and easy operation if your inverter charger is mounted in a location that is inconvenient to access

75 x 6 inches

Charger rate: 115A